Panelboard Acc; Interior; Panelboard; 250 A; 42-Circuit

OVERVIEW

Lighting and Distribution Panels - Type P1

• Interiors have the ability to physicially interchange twoand three-pole breakers with an equivalent number of one-pole breakers.
• Panels come standard with connectors suitable for connection to copper or aluminum cable.
• Panels are labeled as "suitable for use as service entrance equipment."
• Panel interiors have adjustment screws to provide easy alignment for flush mounted applications. The interior is provided with wing nuts for securing to box without tools.
• Removable end-walls are standard and available blank and with KO's.
• Panelboard box has a separate UL label and supplies wire bending and gutter requirements to meet the NEC and UL standards.
• Wiring gutters are completely free of any part of trim clamp to prevent damaging wire insulation.
• Deadfronts are provided with a flange for easy attachment of trim.
• Incoming cable lugs are grouped at one end to separate them from the load side cables.
• Individual circuit number button, as well as an embossed number next to each breaker or provision, are provided.
• The interior shall be provided with wing nuts for securing to box without tools.
• The panel trim may be surface or flush and is equipped with concealed hinges, flush lock and a holder for circuit directory card.Trims are fabricated from code gauge steel and finished ANSI 61.
• Trim shall have two separate supports designed to engage the box flange to stabilize and secure the trim during installation.
• Trim screws to be located behind the lockable door for tamper resistance.